Выберите город:
Выберите город:
In the manufacture of barrels from split cedar, the wood is split along the fibers, so that its structure is not disturbed. You can also notice small bumps in places where the fibers go around the knots. The barrel is collected in the "direction" in which the tree grows. So even over time, the elements do not warp and do not bend to the side.
Products made of split cedar have only one saw cut - the ends, which are carefully insulated, and therefore completely protected from moisture. These barrels are assembled by hand, and therefore are valued higher (like any work of art) and can last up to 10 years or more.
Machine barrels have a cross section of fibers, which is noticeable even to the naked eye - in such products, the wood pattern is clearly visible. There may also be through knots that pass through the entire thickness of the wall - they fall out over time, which leads to the formation of a leak.
Such products are perfectly even, because they come out from under the machine, but at the same time they are short-lived. Regardless of the quality of the assembly, broken fiber remains in the saw cuts. It instantly absorbs moisture and swells, which significantly reduces the service life of the structure (slits appear in the barrel).
The modern market offers a huge range of mini-saunas that can be used in spas and at home. However, only the RosKedr company adheres to cooperage technology and uses split cedar to create barrels.
In addition, we carefully observe cooperage technology and work manually:
As you can see, we not only carefully select raw materials, but also process them correctly. It takes a lot of time and effort, but the result is worth it. Each barrel turns into a real work of art that has served faithfully for decades.
Delivery of products is carried out absolutely in any region of Russia and any country in the world.
When buying a Roscedr cedar phyto barrel for your salon, we will place the contacts of your salon in thecatalog of centers
The table shows the standard specifications, but we can make a barrel of any size upon your request.
Construction weight | 50 kg |
Neck hole diameter | 22 cm |
Upper drum diameter | 61-106 cm |
Lower drum diameter | 65-110 cm |
Barrel height | 130 cm |
Door height | 60 or 90 cm |
Door width | 50 cm |
Step height | 20 cm |
Volume | 4 l |
Voltage | 220 V |
Heating power | 2 kW |
Holding Power | 1 kW |
Warm-up time | 5-10 minutes |
Steam generator type | bulk |
Plastic type | heat resistant |